Infrared Refrigerant Leak Sensor (NDIR) — PPM Early Warning & %LEL Safety
Winsen® infrared (NDIR) refrigerant leak sensors provide stable, selective measurement for A1, A2L, and A3 gases—R134a, R410A, R32, R454B, R1234yf/ze, R290, R600a. Choose ppm-level accuracy for early warning, or %LFL/%LEL for safety interlocks. Seamless BMS/PLC integration via 4–20 mAAr RS-485 Modbus, ir relės išėjimai.
Why Infrared (NDIR) for Refrigerant Leak Detection?
High Selectivity
NDIR measures gas absorption at specific IR wavelengths, delivering excellent selectivity for HFC/HFO refrigerants and robust A2L/A3 options.
Stability & Low Drift
Dual-channel optical design with reference beam minimizes temperature/ageing drift, extending calibration intervals (often 12–24 months).
Not O₂-Dependent
Infrared sensing does not require oxygen, unlike catalytic beads—ideal for machinery rooms, cold rooms, and enclosed HVAC spaces.
Model Guide — Select by Class & Measurement
Infrared (NDIR) refrigerant leak sensors and detectors for A1, A2L, and A3 gases: R32, R454B, R1234yf/ze, R134a, R410A, R290, R600a. PPM early warning & %LEL safety, 4–20 mA, RS-485 Modbus, relay outputs. OEM/ODM by Winsen® for bulk orders.
NDIR šaltnešio jutiklis
Puslaidininkinis šaltnešio jutiklis
How Infrared (NDIR) Refrigerant Sensors Work
| Stage | What Happens | Nauda |
|---|---|---|
| Emission | IR source emits broadband light through the gas sample. | Reliable optical excitation |
| Filtering | Narrowband optical filter targets refrigerant absorption bands; a second channel serves as reference. | Gas selectivity & drift compensation |
| Detection | Photodetectors measure attenuated signal vs. reference; MCU computes concentration. | Stable ppm / %LEL output |
| Compensation | Temperature/pressure & baseline routines (e.g., ABC optional) correct drift. | Long intervals between calibrations |
Tipinės programos
VRF/VRV indoor units & hotel rooms
Mount low (~150–300 mm AFF) near indoor units and pooling points; link alarms to fan shutdown and fresh-air purge.
Chiller & machinery rooms, compressor racks
Place near compressors, separators, valves, and low spots/sumps; use IP-rated housings and BMS interlocks.
Cold storage & refrigerated display cases
Install beneath cases and along manifolds/pipe runs; choose condensation-resistant designs and curtain/exhaust interlocks.
Duomenų centro eilės/CRAC įrenginiai
Position in return air, under raised floors, and near coils; ppm early warning protects personnel and uptime.
Heat pumps & general HVAC
For A2L/A3, use %LFL tiers (e.g., ~25% pre-alarm; ~50% main) to trigger ventilation and equipment shutdown.
Infrared vs. Other Technologies
| Technologijos | Geriausias | Diapazonas | Privalumai | Svarstymai |
|---|---|---|---|---|
| NDIR (infraraudonųjų spindulių) | A1 ppm; A2L ppm/%LEL; A3 %LEL (IR-LEL) | ppm → %LEL | High selectivity, low drift, not O₂-dependent | Higher initial cost; protect from heavy condensation/dust |
| MOS (puslaidininkis) | A2L/A3%LEL | 0–100% LEL | Fast response; cost-effective | Cross-sensitivities; periodic calibration |
| Katalizinis karoliukas | General hydrocarbons (A3) | 0–100% LEL | Mature tech | Needs O₂; can be poisoned (silicones/lead) |
Placement & Setpoints — Good Practice
- Montavimo aukštis: Most refrigerants are heavier than air ⇒ mount low; confirm with airflow studies.
- Aprėptis: Approx. 5–10 m radius per sensor in open rooms; add units near valves/joints and low pockets.
- Alarm tiers: A2L/A3: pre-alarm ≈25% LFL; main ≈50% LFL. A1: ppm bands (e.g., 1,000–5,000 ppm) per spec.
- Užraktai: Pre-alarm → ventilation; Main → equipment shutdown + beacons/BMS alarm.
Užbaikite slenksčius ir kiekius pagal savo projekto specifikaciją ir vietinius kodus.
Kodėl pasauliniai klientai renkasi mus?
Bendrovė nuosekliai laikosi kokybės politikos „Puikus meistriškumas, mokslinės naujovės, tobulumo siekimas ir pridėtinės vertės paslauga“. Formuodamas gamybos procesų valdymo planus ir darbo instrukcijas sukūrė standartizuotą, atskaitingą ir reglamentuotą procesų valdymo sistemą. Be to, įmonė savarankiškai sukūrė MES gamybos valdymo sistemą, leidžiančią visapusiškai ir vizualiai valdyti visą darbo eigą.
30+ METŲ PATIRTIS
R&D, manufacture and sales of sensors and sensing solutions.
KOKYBĖS GARANTIJA NUOLATINIS TOBULINIMAS
Visiškas ir griežtas proceso srauto valdymas kartu su reikšmingais patobulinimais.
TARPTAUTINĖ RINKA
Pristatykite jutimo produktus į daugiau nei 100 šalių ir regionų.
STABILI TIEKIMO GRANDINĖ PATIKIMA GAMYBA
Pagrindiniai komponentai, kuriems netaikomi apribojimai, pažangi gamybos ir bandymo įranga.
R&D STRENGTH TECHNOLOGY INNOVATION
200+ patents, 180+ R&D team members, self-built labs for continous innovation.
VIENO PASLAUGOS PASLAUGA
Profesionali konsultacija, greitas pristatymas, 24 valandų pagalba po pardavimo.
Leading the Industry, Innovative & Controllable Technology
With robust R&D capabilities, we maintain sustained input in R&D and unwavering commitment to technological innovation. This not only ensures that we remain at the forefront of industry but also drives continuous innovation, leading the future trend of the sensing industry.
Prašyti konsultacijos
FAQs — Infrared (NDIR) Refrigerant Leak Sensors
Is NDIR better than MOS for refrigerants?
For ppm early warning and long-term stability, NDIR is typically preferred. For %LEL safety trips on A2L/A3 gases, NDIR-LEL or MOS can both be used depending on budget and environment.
How often do NDIR sensors need calibration?
12–24 months is common with periodic bump tests. High-dust or high-humidity sites may require more frequent checks and filter maintenance.
Where should the sensor be installed?
Near likely leak sources (compressors, valves, joints) and low-lying accumulation points; avoid strong supply air that could bypass the sensor.
Do Winsen IR sensors integrate with BMS/PLC?
Yes—native 4–20 mA, RS-485 Modbus RTU, and relay contacts make integration straightforward.
Can you customize for OEM programs?
Absolutely. We customize ranges, firmware, connectors, harnesses, housings, and branding for volume deployments.
