Infrared Refrigerant Leak Sensor (NDIR) — PPM Early Warning & %LEL Safety
Winsen® infrared (NDIR) refrigerant leak sensors provide stable, selective measurement for A1, A2L, and A3 gases—R134a, R410A, R32, R454B, R1234yf/ze, R290, R600a. Choose ppm-level accuracy for early warning, or %LFL/%LEL for safety interlocks. Seamless BMS/PLC integration via 4-20 mA, RS-485 Modbus, ಮತ್ತು relay outputs.
Why Infrared (NDIR) for Refrigerant Leak Detection?
High Selectivity
NDIR measures gas absorption at specific IR wavelengths, delivering excellent selectivity for HFC/HFO refrigerants and robust A2L/A3 options.
Stability & Low Drift
Dual-channel optical design with reference beam minimizes temperature/ageing drift, extending calibration intervals (often 12–24 months).
Not O₂-Dependent
Infrared sensing does not require oxygen, unlike catalytic beads—ideal for machinery rooms, cold rooms, and enclosed HVAC spaces.
Model Guide — Select by Class & Measurement
Infrared (NDIR) refrigerant leak sensors and detectors for A1, A2L, and A3 gases: R32, R454B, R1234yf/ze, R134a, R410A, R290, R600a. PPM early warning & %LEL safety, 4–20 mA, RS-485 Modbus, relay outputs. OEM/ODM by Winsen® for bulk orders.
NDIR ರೆಫ್ರಿಜರೆಂಟ್ ಸಂವೇದಕ
ಸೆಮಿಕಂಡಕ್ಟರ್ ರೆಫ್ರಿಜರೆಂಟ್ ಸೆನ್ಸರ್
How Infrared (NDIR) Refrigerant Sensors Work
| Stage | What Happens | ಲಾಭ |
|---|---|---|
| Emission | IR source emits broadband light through the gas sample. | Reliable optical excitation |
| Filtering | Narrowband optical filter targets refrigerant absorption bands; a second channel serves as reference. | Gas selectivity & drift compensation |
| Detection | Photodetectors measure attenuated signal vs. reference; MCU computes concentration. | Stable ppm / %LEL output |
| Compensation | Temperature/pressure & baseline routines (e.g., ABC optional) correct drift. | Long intervals between calibrations |
ವಿಶಿಷ್ಟ ಅಪ್ಲಿಕೇಶನ್ಗಳು
VRF/VRV indoor units & hotel rooms
Mount low (~150–300 mm AFF) near indoor units and pooling points; link alarms to fan shutdown and fresh-air purge.
Chiller & machinery rooms, compressor racks
Place near compressors, separators, valves, and low spots/sumps; use IP-rated housings and BMS interlocks.
Cold storage & refrigerated display cases
Install beneath cases and along manifolds/pipe runs; choose condensation-resistant designs and curtain/exhaust interlocks.
ಡೇಟಾ ಸೆಂಟರ್ ಇನ್-ರೋ/CRAC ಘಟಕಗಳು
Position in return air, under raised floors, and near coils; ppm early warning protects personnel and uptime.
Heat pumps & general HVAC
For A2L/A3, use %LFL tiers (e.g., ~25% pre-alarm; ~50% main) to trigger ventilation and equipment shutdown.
Infrared vs. Other Technologies
| ತಂತ್ರಜ್ಞಾನ | ಅತ್ಯುತ್ತಮ ಫಾರ್ | ಶ್ರೇಣಿ | ಅನುಕೂಲಗಳು | ಪರಿಗಣನೆಗಳು |
|---|---|---|---|---|
| NDIR (ಅತಿಗೆಂಪು) | A1 ppm; A2L ppm/%LEL; A3 %LEL (IR-LEL) | ppm → %LEL | High selectivity, low drift, not O₂-dependent | Higher initial cost; protect from heavy condensation/dust |
| MOS (ಸೆಮಿಕಂಡಕ್ಟರ್) | A2L/A3 %LEL | 0–100% LEL | Fast response; cost-effective | Cross-sensitivities; periodic calibration |
| Catalytic Bead | ಸಾಮಾನ್ಯ ಹೈಡ್ರೋಕಾರ್ಬನ್ಗಳು (A3) | 0–100% LEL | Mature tech | Needs O₂; can be poisoned (silicones/lead) |
Placement & Setpoints — Good Practice
- ಆರೋಹಿಸುವಾಗ ಎತ್ತರ: Most refrigerants are heavier than air ⇒ mount low; confirm with airflow studies.
- Coverage: Approx. 5–10 m radius per sensor in open rooms; add units near valves/joints and low pockets.
- Alarm tiers: A2L/A3: pre-alarm ≈25% LFL; main ≈50% LFL. A1: ppm bands (e.g., 1,000–5,000 ppm) per spec.
- Interlocks: Pre-alarm → ventilation; Main → equipment shutdown + beacons/BMS alarm.
Finalize thresholds and quantities against your project specification and local codes.
ಜಾಗತಿಕ ಗ್ರಾಹಕರು ನಮ್ಮನ್ನು ಏಕೆ ಆಯ್ಕೆ ಮಾಡುತ್ತಾರೆ?
ಕಂಪನಿಯು "ಉತ್ತಮ ಕರಕುಶಲತೆ, ವೈಜ್ಞಾನಿಕ ನಾವೀನ್ಯತೆ, ಶ್ರೇಷ್ಠತೆಯ ಅನ್ವೇಷಣೆ ಮತ್ತು ಮೌಲ್ಯವರ್ಧಿತ ಸೇವೆಯ" ಗುಣಮಟ್ಟದ ನೀತಿಯನ್ನು ಸ್ಥಿರವಾಗಿ ಅನುಸರಿಸುತ್ತದೆ. ಉತ್ಪಾದನಾ ಪ್ರಕ್ರಿಯೆ ನಿಯಂತ್ರಣ ಯೋಜನೆಗಳು ಮತ್ತು ಕೆಲಸದ ಸೂಚನೆಗಳನ್ನು ರೂಪಿಸುವ ಮೂಲಕ, ಇದು ಪ್ರಮಾಣಿತ, ಜವಾಬ್ದಾರಿಯುತ ಮತ್ತು ನಿಯಂತ್ರಿತ ಪ್ರಕ್ರಿಯೆ ನಿರ್ವಹಣಾ ವ್ಯವಸ್ಥೆಯನ್ನು ಸ್ಥಾಪಿಸಿದೆ. ಹೆಚ್ಚುವರಿಯಾಗಿ, ಕಂಪನಿಯು ಸ್ವತಂತ್ರವಾಗಿ MES ಉತ್ಪಾದನಾ ನಿರ್ವಹಣಾ ವ್ಯವಸ್ಥೆಯನ್ನು ಅಭಿವೃದ್ಧಿಪಡಿಸಿದೆ, ಸಂಪೂರ್ಣ ಕೆಲಸದ ಹರಿವಿನಾದ್ಯಂತ ಸಮಗ್ರ ಮತ್ತು ದೃಶ್ಯ ನಿರ್ವಹಣೆಯನ್ನು ಸಕ್ರಿಯಗೊಳಿಸುತ್ತದೆ.
30+ ವರ್ಷಗಳ ಅನುಭವ
R&D, manufacture and sales of sensors and sensing solutions.
ಗುಣಮಟ್ಟದ ಗ್ಯಾರಂಟಿ ನಿರಂತರ ಸುಧಾರಣೆ
ಸಂಪೂರ್ಣ ಮತ್ತು ಕಟ್ಟುನಿಟ್ಟಾದ ಪ್ರಕ್ರಿಯೆಯ ಹರಿವಿನ ನಿಯಂತ್ರಣ, ಗಮನಾರ್ಹ ಸುಧಾರಣೆಗಳೊಂದಿಗೆ.
ಅಂತರಾಷ್ಟ್ರೀಯ ಮಾರುಕಟ್ಟೆ
100 ಕ್ಕೂ ಹೆಚ್ಚು ದೇಶಗಳು ಮತ್ತು ಪ್ರದೇಶಗಳಿಗೆ ಸಂವೇದನಾ ಉತ್ಪನ್ನಗಳನ್ನು ತಲುಪಿಸಿ.
ಸ್ಥಿರ ಪೂರೈಕೆ ಸರಪಳಿ ವಿಶ್ವಾಸಾರ್ಹ ಉತ್ಪಾದನೆ
ಕೋರ್ ಘಟಕಗಳು ನಿರ್ಬಂಧಗಳಿಗೆ ಒಳಪಡುವುದಿಲ್ಲ, ತಯಾರಿಕೆ ಮತ್ತು ಪರೀಕ್ಷೆಗಾಗಿ ಸುಧಾರಿತ ಉಪಕರಣಗಳು.
R&D STRENGTH TECHNOLOGY INNOVATION
200+ patents, 180+ R&D team members, self-built labs for continous innovation.
ಏಕ-ನಿಲುಗಡೆ ಸೇವೆ
ವೃತ್ತಿಪರ ಸಮಾಲೋಚನೆ, ವೇಗದ ವಿತರಣೆ, 24 ಗಂಟೆಗಳ ನಂತರ ಮಾರಾಟದ ಬೆಂಬಲ.
Leading the Industry, Innovative & Controllable Technology
With robust R&D capabilities, we maintain sustained input in R&D and unwavering commitment to technological innovation. This not only ensures that we remain at the forefront of industry but also drives continuous innovation, leading the future trend of the sensing industry.
FAQs — Infrared (NDIR) Refrigerant Leak Sensors
Is NDIR better than MOS for refrigerants?
For ppm early warning and long-term stability, NDIR is typically preferred. For %LEL safety trips on A2L/A3 gases, NDIR-LEL or MOS can both be used depending on budget and environment.
How often do NDIR sensors need calibration?
12–24 months is common with periodic bump tests. High-dust or high-humidity sites may require more frequent checks and filter maintenance.
Where should the sensor be installed?
Near likely leak sources (compressors, valves, joints) and low-lying accumulation points; avoid strong supply air that could bypass the sensor.
Do Winsen IR sensors integrate with BMS/PLC?
Yes—native 4–20 mA, RS-485 Modbus RTU, and relay contacts make integration straightforward.
Can you customize for OEM programs?
Absolutely. We customize ranges, firmware, connectors, harnesses, housings, and branding for volume deployments.
