Infrared Refrigerant Leak Sensor (NDIR) — PPM Early Warning & %LEL Safety
Winsen® infrared (NDIR) refrigerant leak sensors provide stable, selective measurement for A1, A2L, and A3 gases—R134a, R410A, R32, R454B, R1234yf/ze, R290, R600a. Choose ppm-level accuracy for early warning, or %LFL/%LEL for safety interlocks. Seamless BMS/PLC integration via 4–20 MaVerdzība RS-485 Modbus, un releju izejasApvidū
Why Infrared (NDIR) for Refrigerant Leak Detection?
High Selectivity
NDIR measures gas absorption at specific IR wavelengths, delivering excellent selectivity for HFC/HFO refrigerants and robust A2L/A3 options.
Stability & Low Drift
Dual-channel optical design with reference beam minimizes temperature/ageing drift, extending calibration intervals (often 12–24 months).
Not O₂-Dependent
Infrared sensing does not require oxygen, unlike catalytic beads—ideal for machinery rooms, cold rooms, and enclosed HVAC spaces.
Model Guide — Select by Class & Measurement
Infrared (NDIR) refrigerant leak sensors and detectors for A1, A2L, and A3 gases: R32, R454B, R1234yf/ze, R134a, R410A, R290, R600a. PPM early warning & %LEL safety, 4–20 mA, RS-485 Modbus, relay outputs. OEM/ODM by Winsen® for bulk orders.
NDIR aukstumnesēja sensors
Pusvadītāju aukstumaģenta sensors
How Infrared (NDIR) Refrigerant Sensors Work
| Stage | What Happens | Benefit |
|---|---|---|
| Emission | IR source emits broadband light through the gas sample. | Reliable optical excitation |
| Filtering | Narrowband optical filter targets refrigerant absorption bands; a second channel serves as reference. | Gas selectivity & drift compensation |
| Detection | Photodetectors measure attenuated signal vs. reference; MCU computes concentration. | Stable ppm / %LEL output |
| Compensation | Temperature/pressure & baseline routines (e.g., ABC optional) correct drift. | Long intervals between calibrations |
Typical Applications
VRF/VRV indoor units & hotel rooms
Uzstādiet zemu (~150–300 mm AFF) pie iekštelpu blokiem un apvienošanās punktiem; savienojiet trauksmes signālus ar ventilatora izslēgšanu un svaiga gaisa attīrīšanu.
Chiller & machinery rooms, compressor racks
Place near compressors, separators, valves, and low spots/sumps; use IP-rated housings and BMS interlocks.
Cold storage & refrigerated display cases
Install beneath cases and along manifolds/pipe runs; choose condensation-resistant designs and curtain/exhaust interlocks.
Datu centra rindas/CRAC vienības
Position in return air, under raised floors, and near coils; ppm early warning protects personnel and uptime.
Heat pumps & general HVAC
For A2L/A3, use %LFL tiers (e.g., ~25% pre-alarm; ~50% main) to trigger ventilation and equipment shutdown.
Infrared vs. Other Technologies
| Tehnika | Labākais priekš | Diapazons | Priekšrocības | Apsvērumi |
|---|---|---|---|---|
| NDIR (infrasarkanais) | A1 ppm; A2L ppm/%LEL; A3 %LEL (IR-LEL) | ppm → %LEL | High selectivity, low drift, not O₂-dependent | Higher initial cost; protect from heavy condensation/dust |
| MOS (pusvadītājs) | A2L/A3%LEL | 0–100% LEL | Fast response; cost-effective | Cross-sensitivities; periodic calibration |
| Katalītiskā lodīte | Vispārējie ogļūdeņraži (A3) | 0–100% LEL | Mature tech | Needs O₂; can be poisoned (silicones/lead) |
Placement & Setpoints — Good Practice
- Montāžas augstums: Lielākā daļa aukstumaģentu ir smagāki par gaisu ⇒ uzstādīt zemu; apstipriniet ar gaisa plūsmas pētījumiem.
- Pārklājums: Approx. 5–10 m radius per sensor in open rooms; add units near valves/joints and low pockets.
- Signalizācijas līmeņi: A2L/A3: pre-alarm ≈25% LFL; main ≈50% LFL. A1: ppm bands (e.g., 1,000–5,000 ppm) per spec.
- Bloķējumi: Pre-alarm → ventilation; Main → equipment shutdown + beacons/BMS alarm.
Pabeidziet sliekšņus un daudzumus atbilstoši sava projekta specifikācijai un vietējiem kodiem.
Kāpēc globālie klienti izvēlas mūs?
Uzņēmums konsekventi ievēro kvalitatīvu politiku “smalkas meistarības, zinātniskas inovācijas, izcilības sasniegšana un pievienotā vērtība”. Formulējot ražošanas procesa kontroles plānus un darba instrukcijas, tas ir izveidojis standartizētu, atbildīgu un regulētu procesu pārvaldības sistēmu. Turklāt uzņēmums ir patstāvīgi izstrādājis Mes ražošanas pārvaldības sistēmu, kas nodrošina visaptverošu un vizuālu pārvaldību visā darbplūsmā.
30+ gadu pieredze
R&D, manufacture and sales of sensors and sensing solutions.
Kvalitātes garantija nepārtraukta uzlabošana
Pilnīga un stingra procesa plūsmas kontrole, kā arī ievērojami uzlabojumi.
Starptautiskais tirgus
Piegādājiet sensoru produktus vairāk nekā 100 valstīm un reģioniem.
Stabila piegādes ķēde Uzticama ražošana
Galvenās sastāvdaļas, uz kurām nav pakļauti ierobežojumi, uzlabotas iekārtas ražošanai un pārbaudei.
R&D STRENGTH TECHNOLOGY INNOVATION
200+ patents, 180+ R&D team members, self-built labs for continous innovation.
Vienas pieturas pakalpojums
Profesionāla konsultācija, ātra piegāde, 24 stundas pēc pārdošanas atbalsta.
Leading the Industry, Innovative & Controllable Technology
With robust R&D capabilities, we maintain sustained input in R&D and unwavering commitment to technological innovation. This not only ensures that we remain at the forefront of industry but also drives continuous innovation, leading the future trend of the sensing industry.
Pieprasīt konsultāciju
FAQs — Infrared (NDIR) Refrigerant Leak Sensors
Is NDIR better than MOS for refrigerants?
For ppm early warning and long-term stability, NDIR is typically preferred. For %LEL safety trips on A2L/A3 gases, NDIR-LEL or MOS can both be used depending on budget and environment.
How often do NDIR sensors need calibration?
12–24 months is common with periodic bump tests. High-dust or high-humidity sites may require more frequent checks and filter maintenance.
Where should the sensor be installed?
Near likely leak sources (compressors, valves, joints) and low-lying accumulation points; avoid strong supply air that could bypass the sensor.
Do Winsen IR sensors integrate with BMS/PLC?
Yes—native 4–20 mA, RS-485 Modbus RTU, and relay contacts make integration straightforward.
Can you customize for OEM programs?
Absolutely. We customize ranges, firmware, connectors, harnesses, housings, and branding for volume deployments.
