R1234yf Leak Sensor (1234yf Leak Detector) — A2L Refrigerant Monitoring
Winsen® provides fixed R1234yf leak sensors and detectors for automotive MAC (manufacturing, service bays, end-of-line testing) and HVAC heat-pump/VRF deployments that adopt A2L refrigerants. Choose NDIR for ppm early warning or MOS/NDIR for %LEL safety interlocks—ready for BMS/PLC via 4–20 mA, RS-485 Modbus, and relay outputs.




Where R1234yf Leak Sensors Are Used
Automotive Service Bays & Garages
Monitor near service manifolds, charging/recovery stations, under-vehicle pits, and low-lying accumulation points. Link alarms to exhaust fans and technician beacons for rapid response.
OEM Assembly & End-of-Line Test
HVAC/Heat Pump & VRF Adoptions
என்டிஐஆர் குளிர்பதன சென்சார்
செமிகண்டக்டர் குளிர்பதன சென்சார்
Model Guide — Select Your R1234yf Leak Sensor
NDIR PPM Sensor (Early Warning)
- Range: 0–1,000 / 0–5,000 ppm (customizable)
- Outputs: 4–20 mA, RS-485 Modbus, 1–2 relays
- Response: T90 ≤ 30 s; low drift, long life
- Use: Process monitoring, comfort spaces, uptime protection
%LEL Sensor (Safety Interlocks)
- Range: 0–100% LFL/LEL
- Outputs: 4-20 mA / RS-485 / ரிலேக்கள்
- அலாரங்கள்: Typical pre-alarm ~25% LFL; main ~50% LFL
- Use: Ventilation start, equipment shutdown, beacon/horn
Panel / Duct / IP65 Options
- Wall, panel, duct probes; splash/dust guards
- Operating: −20…+50 °C; 15–95% RH (non-condensing)*
- Housings up to IP65 for rugged areas
- *Model-dependent; consult datasheet
இது எவ்வாறு இயங்குகிறது - தொழில்நுட்ப கண்ணோட்டம்
| தொழில்நுட்பம் | சிறந்தது | வரம்பு | நன்மைகள் | பரிசீலனைகள் |
|---|---|---|---|---|
| என்டிஐஆர் (சிதறாத அகச்சிவப்பு) | PPM early warning; stability | 0–1,000 / 0–5,000 ppm (custom) | High selectivity, low drift, long service life | Protect from heavy condensation/dust (use filters/enclosures) |
| MOS / NDIR-LEL | %LFL safety interlocks | 0–100% LFL/LEL | Fast response; robust; cost-effective for safety trips | Cross-sensitivity possible; periodic calibration recommended |
Placement & Setpoints — Good Practice
- ஏற்ற உயரம்: R1234yf is denser than air; mount low (≈150–300 mm above floor) near likely leak sources and pooling points.
- Covers & guards: Use IP-rated housings or splash/dust guards in busy service areas and test booths.
- Setpoints: Early warning via ppm (comfort, process) and safety via %LFL bands (e.g., ~25% pre-alarm; ~50% main). Tie to fans, interlocks, and beacons.
- Integration: 4–20 mA and RS-485 Modbus to BMS/PLC; relays for direct control of ventilation/shutdown.
வழக்கமான HVAC பயன்பாடுகள்

VRF/VRV indoor units & hotel rooms
Mount low (~150–300 mm above floor) near indoor units and pooling points. Tie alarms to fan shutdown and fresh-air purge; choose ppm or %LEL setpoints per spec.

Chiller & machinery rooms, compressor racks
Place near compressors, oil separators, valves, and low spots/sumps. Use IP-rated enclosures and BMS interlocks: pre-alarm → purge; main alarm → trip plant.

Cold storage & refrigerated display cases
Install under cases and along manifolds/pipe runs. Select low-temperature, condensation-resistant housings; alarms can start extract and close night curtains.

தரவு மையம் வரிசையில்/CRAC அலகுகள்
Position in return-air paths, beneath raised floors, and near coils. PPM early warning protects personnel and uptime; integrate shutdown and ventilation override.

Heat pump & general HVAC equipment
For A2L/A3, monitor near compressors/valves and in return air; use %LFL interlocks for safe shutdown. Weatherproof housings for outdoor units.
முக்கிய விவரக்குறிப்புகள் (வழக்கமான)
| அளவுரு | மதிப்பு / விருப்பம் |
|---|---|
| இலக்கு வாயு | R1234yf (A2L) |
| அளவீடு | NDIR ppm and/or %LFL (MOS/NDIR) |
| வெளியீடுகள் | 4-20 mA (2/3-கம்பி), RS-485 Modbus RTU, 1-2 ரிலேக்கள் (N.O./N.C.) |
| மறுமொழி நேரம் (T90) | ≤ 20-30 வி |
| வழங்கல் | 12–24 VDC (கோரிக்கையின் பேரில் மற்றவை) |
| இயக்க நிலைமைகள் | −20…+50 °C; 15–95% RH ஒடுக்கம் அல்லாத (மாதிரி சார்ந்தது) |
| அடைப்புகள் | Wall, panel, duct; up to IP65 |
| இணக்கம் | CE, RoHS; BMS/PLC integration |
சென்சார் தொழில்நுட்பங்கள்: NDIR vs. MOS
| அம்சம் | என்டிஐஆர் (அகச்சிவப்பு) | MOS (செமிகண்டக்டர்) |
|---|---|---|
| துல்லியம் | அதிக (±2% FS) | மிதமான (±5% FS) |
| பதில் நேரம் | 1-3 வினாடிகள் | <1 second |
| மின் நுகர்வு | <25 mW | <50 mW |
| வாழ்நாள் | >5 years | 2-3 ஆண்டுகள் |
| செலவு | உயர்ந்தது | கீழ் |
| சிறந்த பயன்பாடு | Safety-critical HVAC & commercial | குறைந்த விலை உபகரணங்கள் |
ஓமானுக்கான பரிந்துரை:
போன்ற பெரிய அளவிலான மற்றும் பாதுகாப்பு முக்கியமான அமைப்புகளுக்கு மாவட்ட குளிர்ச்சி, ஹோட்டல்கள் மற்றும் குளிர்பதன சேமிப்பு, தேர்வு என்டிஐஆர் தொழில்நுட்பம். வீட்டு உபயோகப் பொருட்கள் மற்றும் குறைந்த விலை பொருட்களுக்கு, MOS சென்சார்கள் செலவு குறைந்த மாற்று வழங்கவும்.
உலகளாவிய வாடிக்கையாளர்கள் எங்களை ஏன் தேர்வு செய்கிறார்கள்?
"நல்ல கைவினைத்திறன், அறிவியல் கண்டுபிடிப்பு, சிறந்து விளங்குதல் மற்றும் மதிப்பு கூட்டப்பட்ட சேவை" என்ற தரக் கொள்கையை நிறுவனம் தொடர்ந்து கடைப்பிடிக்கிறது. உற்பத்தி செயல்முறை கட்டுப்பாட்டு திட்டங்கள் மற்றும் பணி வழிமுறைகளை உருவாக்குவதன் மூலம், இது ஒரு தரப்படுத்தப்பட்ட, பொறுப்பு மற்றும் ஒழுங்குபடுத்தப்பட்ட செயல்முறை மேலாண்மை அமைப்பை நிறுவியுள்ளது. கூடுதலாக, நிறுவனம் சுயாதீனமாக ஒரு MES உற்பத்தி மேலாண்மை அமைப்பை உருவாக்கியுள்ளது, முழு பணிப்பாய்வு முழுவதும் விரிவான மற்றும் காட்சி நிர்வாகத்தை செயல்படுத்துகிறது.

30+ வருட அனுபவம்
R&D, manufacture and sales of sensors and sensing solutions.
தர உத்தரவாதம் தொடர்ச்சியான முன்னேற்றம்
முழுமையான மற்றும் உறுதியான செயல்முறை ஓட்டக் கட்டுப்பாடு, குறிப்பிடத்தக்க மேம்பாடுகளுடன்.


சர்வதேச சந்தை
100 க்கும் மேற்பட்ட நாடுகள் மற்றும் பிராந்தியங்களுக்கு உணர்திறன் தயாரிப்புகளை வழங்கவும்.
நிலையான விநியோகச் சங்கிலி நம்பகமான உற்பத்தி
முக்கிய கூறுகள் கட்டுப்பாடுகளுக்கு உட்பட்டது அல்ல, உற்பத்தி மற்றும் சோதனைக்கான மேம்பட்ட உபகரணங்கள்.


R&D STRENGTH TECHNOLOGY INNOVATION
200+ patents, 180+ R&D team members, self-built labs for continous innovation.
ஒரு நிறுத்த சேவை
தொழில்முறை ஆலோசனை, விரைவான டெலிவரி, விற்பனைக்குப் பின் 24 மணிநேர ஆதரவு.

Leading the Industry, Innovative & Controllable Technology
With robust R&D capabilities, we maintain sustained input in R&D and unwavering commitment to technological innovation. This not only ensures that we remain at the forefront of industry but also drives continuous innovation, leading the future trend of the sensing industry.

10% R&D Input
The average annual R&D input exceeds 10% of the annual revenue.
5+ R&D Layout
With Zhengzhou headquarters as the core, a nationwide R&D and innovation system is being established, encompassing cities of Shanghai, Wuhan, Shenzhen, and Taiyuan.
180+ R&D Team
There are over 180 R&D personnel, including more than 10 with doctoral degrees and over 50 with master's degrees, who have an average of more than 8 years of experience in sensor development.
20+ பரிசோதனை வகைகள்
எரிவாயு தொடர்பான, காலநிலை சூழல், EMC, மின் செயல்திறன், இயந்திர செயல்திறன் போன்றவை.
10+ மேம்பட்ட ஆய்வகங்கள்
CNAS ஆய்வகம், MEMS ஆய்வகம், UL ஆய்வகம், நானோகாம்போசிட் மெட்டீரியல்ஸ் ஆய்வகம் போன்றவை.
400+ sets Leading R&D Equipment
கியூப் ஸ்டோரேஜ், டை பாண்டர், லித்தோகிராஃபி மெஷின், கோட்டிங் மெஷின், SMT பிளேஸ்மென்ட் மெஷின், ஆட்டோமேட்டிக் ப்ரோப் ஸ்டேஷன் போன்றவை.
FAQs — Refrigerant Leak Sensors & Detectors
Is R1234yf flammable?
It’s classified as A2L (mildly flammable). Projects typically use %LFL alarm bands for safety interlocks and evacuation/ventilation logic.
Should I pick ppm or %LFL measurement?
Use ppm (NDIR) for early warning and process monitoring. Use %LFL (MOS/NDIR-LEL) to drive safety interlocks such as ventilation start and equipment shutdown. Many facilities deploy both.
Where do I install sensors in a workshop?
Near charging/recovery stations, hose sets, brazed joints, and low-lying areas where gas may accumulate. Avoid direct supply air and strong drafts that bypass the sensor.
எவ்வளவு அடிக்கடி அளவுத்திருத்தம் தேவைப்படுகிறது?
Typical intervals are 12–24 months, with periodic bump tests. High-traffic or dusty areas may require more frequent checks.
Do you support OEM customization?
Yes—custom ranges, firmware, connectors, harnesses, labels/branding, and packaging for volume orders are available.















