AC Freon Leak Sensor (Leak Detector) — Split/VRF • Central AC • Auto A/C
Winsen® manufactures electronic leak sensors for kliimaseadmete külmutusagensid across residential, commercial, and automotive applications. For building HVAC, we cover R410A, R32, R454B, and legacy R134a/R22*; for automotive A/C we support R1234yf ja R134a. Choose On n jaoks ppm varajase hoiatamise ja MOS/DIR for %LEL safety interlocks with 4–20 mA, RS-485 Modbusja relee väljundid ready for BMS/PLC integration.
Model Guide — Pick by AC Type & Refrigerant
Home/Commercial AC — A1 (NDIR PPM)
- Ranges: 0–1,000 / 0–5,000 ppm (custom)
- Väljundid: 4–20 mA, RS-485 Modbus, 1–2 releed
- T90 ≤ 30 s • Väike triiv, pikk kasutusiga
*R22 is legacy/service gas in many regions.
Home/Commercial AC — A2L (NDIR PPM / %LEL)
- PPM varane hoiatus (NDIR) ja/või 0–100% LFL/LEL
- 4–20 mA / RS-485 / releed
- Ideal for VRF/VRV rooms & hotel guestrooms
Automotive A/C — A2L/A1
- NDIR ppm for process/comfort; %LEL for interlocks
- Integrate at charge stations, test booths, bays
- Modbus for line interlocks & traceability
What “AC Freon” Means
In everyday language, “Freon” often means any AC refrigerant. Technically, Freon™ is a trademark historically used for CFC/HCFC/HFC products (e.g., R12/R22). This page uses “AC Freon leak sensor” in the common sense—electronic fixed sensors that detect refrigerant leaks in air-conditioning systems.
NDIR külmutusagensi andur
Pooljuht külmutusagensi andur
Infrapuna (NDIR) külmutusagensi andurid töötavad
| Lava | Mis juhtub | Kasu |
|---|---|---|
| Emissioon | IR-allikas kiirgab läbi gaasiproovi lairibavalgust. | Usaldusväärne optiline ergutus |
| Filtreerimine | Kitsaribaline optiline filter sihib külmutusagensi neeldumisribasid; teine kanal on võrdluseks. | Gas selectivity & drift compensation |
| Tuvastamine | Fotodetektorid mõõdavad nõrgestatud signaali vs. MCU arvutab kontsentratsiooni. | Stabiilne ppm / %LEL väljund |
| Hüvitis | Temperature/pressure & baseline routines (e.g., ABC optional) correct drift. | Pikad intervallid kalibreerimiste vahel |
Typical AC Applications
Split/VRF indoor units & hotel rooms
Mount low (~150–300 mm above floor) near indoor units, under beds/sofas in hotel rooms, and other pooling points. Pre-alarm → fresh-air purge; main alarm → fan/indoor-unit shutdown.
Central AC air handlers & mechanical rooms
Place near coils, expansion valves, and floor low spots/sumps; use IP-rated enclosures. Integrate with BMS to start purge fans at pre-alarm and trip systems at main alarm.
Line sets, evaporator/condensing sections
Monitor around brazed joints, service valves, and manifolds; avoid strong supply streams that bypass the sensor.
Automotive service bays & EOL test
Position near charging/recovery stations and low-lying areas. Use ppm early warning plus %LFL safety interlocks (beacon/horn/vent).
Tehnoloogia valikud
| Tehnoloogia | Parim jaoks | Vahemik | Eelised | Kaalutlused |
|---|---|---|---|---|
| NDIR (infrapuna) | A1 ppm; A2L ppm/%LEL | ppm → %LEL | High selectivity & stability; not O₂-dependent; long life | Protect from heavy condensation/dust (filters/enclosure) |
| MOS (pooljuht) | A2L/A3%LEL | 0–100% LEL | Kiire reageerimine; vastupidav; tasuv | Cross-sensitivities possible; periodic calibration advised |
| Katalüütiline rant | Üldised süsivesinikud (A3) | 0–100% LEL | Mature tech for flammables | Requires O₂; susceptible to poisons (silicones/lead) |
Placement & Setpoints — Good Practice for AC
- Paigalduskõrgus: Most AC refrigerants are heavier than air ⇒ mount low; confirm with room airflow.
- Katvus: ~5–10 m raadiusega anduri kohta avatud ruumides; lisada üksused ventiilide/liigendite ja madalate taskute lähedusse.
- Häiretasemed: A2L/A3: pre-alarm ≈25% LFL; main ≈50% LFL. A1: ppm tiers (e.g., 1,000–5,000 ppm) per design spec.
- Blokeeringud: Pre-alarm → ventilation/start purge; Main → equipment shutdown + horn/beacon/BMS notification.
Lõpetage künnised ja kogused vastavalt kohalikele koodidele ja oma projekti spetsifikatsioonile.
Miks globaalsed kliendid meid valivad?
Ettevõte järgib järjekindlalt kvaliteedipoliitikat "peen käsitöö, teaduslik innovatsioon, tipptaseme saavutamine ja lisandväärtusega teenus". Tootmisprotsesside juhtimisplaanide ja tööjuhendite koostamisega on ta loonud standardiseeritud, vastutustundliku ja reguleeritud protsesside juhtimissüsteemi. Lisaks on ettevõte iseseisvalt välja töötanud MES-i tootmisjuhtimissüsteemi, mis võimaldab terviklikku ja visuaalset juhtimist kogu töövoo ulatuses.
30+ AASTAT KOGEMUST
R&D, manufacture and sales of sensors and sensing solutions.
KVALITEEDI GARANTII PIDEV TÄIENDAMINE
Täielik ja jäik protsessivoo juhtimine koos oluliste täiustustega.
RAHVUSVAHELINE TURG
Tarnige anduritooteid enam kui 100 riiki ja piirkonda.
STABIILNE TARNEAHEL KINNITAV TOOTMINE
Põhikomponendid, millele ei kehti piirangud, täiustatud seadmed tootmiseks ja testimiseks.
R&D STRENGTH TECHNOLOGY INNOVATION
200+ patents, 180+ R&D team members, self-built labs for continous innovation.
Ühetoruteenus
Professionaalne konsultatsioon, kiire tarne, 24-tunnine müügijärgne tugi.
Leading the Industry, Innovative & Controllable Technology
With robust R&D capabilities, we maintain sustained input in R&D and unwavering commitment to technological innovation. This not only ensures that we remain at the forefront of industry but also drives continuous innovation, leading the future trend of the sensing industry.
Taotlege konsultatsiooni
KKK – infrapuna (NDIR) külmutusagensi lekkeandurid
Is “AC Freon” the same as refrigerant?
In common use, yes. Freon™ is a trademark historically used for certain refrigerants; we use the term generically here to match search intent.
Do I need ppm or %LEL measurement for AC?
Use ppm (NDIR) for early warning and comfort/process protection. Use %LEL (MOS/NDIR-LEL) to drive safety interlocks for A2L/A3 gases (e.g., R32/R454B).
Where should sensors be installed in rooms?
Near indoor units, valves, joints, and floor-level accumulation points; avoid strong supply air. In hotels, place low and accessible for maintenance.
Kui sageli on kalibreerimist vaja?
12–24 months is typical with periodic bump tests; harsher environments may need more frequent checks.
Can Winsen customize for OEM rollouts?
Yes—ranges, firmware, connectors, harnesses, housings, and branding are customizable for volume programs.
